Forge Motorsport Turbo Inlet Adaptor for VAG 1.0 TSI Engine (OPF Equipped)

Compatibility

Fitment information

Application

Forge Motorsport Turbo Inlet Adaptor for VAG 1.0 TSI Engine (OPF Equipped); With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger.; We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine.; The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.; This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune.; This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.; The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity No engine check lights (EML) Increased air flow Lifetime warranty*; Engine Tuning

Product selection

Before you order

• Match the supplier part number and listed application to your vehicle.
• Check the dimensions and product specification before ordering.
• Contact us if you would like product advice.

Delivery: UK delivery is £7.99, free on orders of £100 or more. Dispatch timing depends on the item and supplier.