Forge VW, Audi, Skoda, and Seat 1.6TDi and 2.0TDi Oil Cooler Take-Off Plate – -8AN

Compatibility

Fitment information

Application

The oil filter housing on modern VAG engines does not allow for the previously common takeoff plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle.; Instead they now use a oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersize filter, or a paper drop in element, which prevents easy fitting of an oil cooler.; As many people have found, if the vehicle is tuned, or if it is towing a heavy load, oil temperatures can rocket, with oil temperatures over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down.; The Forge Motorsport FMOC2 replaces the oil to water cooling block, and although it still allows coolant to circulate, it more importantly gives two M22 takeoffs which, when fitted with the appropriate adaptor, allow fitment of oil cooler lines between an -6 and an -10 in size (not supplied) which can then be attached to an external oil cooler.; To confirm fitment, please check the list of compatible vehilces below.; It fits ALL of the 2.0TDi and 1.6 TDi engines in the vehicles listed below.; Engine Tuning; Audi; Seat; Skoda

Product selection

Before you order

• Match the supplier part number and listed application to your vehicle.
• Check the dimensions and product specification before ordering.
• Contact us if you would like product advice.

Delivery: UK delivery is £7.99, free on orders of £100 or more. Dispatch timing depends on the item and supplier.